ADDENDUM
Addendum No. C2499M-A
Date November 17, 2005
Manuals Affected Spectra III™ SE Series Dome Drive Manuals: C2443M-C, C2444M-C, and C2445M-D
Manual Update The following are manual changes for Spectra III SE software Version 1.28 and greater and instructions for accessing a
Spectra III EVS dome system.
Presets
Spectra III SE system presets have been upgraded from 80 to 150. Each of the user-definable presets can be programmed to use pan, tilt, camera settings,
and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150.
The following presets are predefined for specific functions:
33
34
88
89
“Flip” command
95
96
97
98
99
Select main programming menu
Stop a scan
“Pan zero” command
IR filter IN (color)
Random scanning
Frame scanning
IR filter OUT (black-white)
90-91 Manual limit stops
92-93 Scan limit stops
Start auto scanning
Title Text
Title Text has been added to the Dome Settings menu. The title text is the
label used to identify the camera when it is viewed on the monitor. Up to
20 characters can be used for a title.
DOME SETTINGS
TITLE TEXT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
ENABLE TITLE TEXT
<EDIT TITLE TEXT>
BACK
EXIT
To edit the title text label, do the following:
1. Use the joystick to position the cursor beside EDIT TITLE TEXT.
<CLEAR>
<PASSWORD>
BACK
EXIT
2. Press Iris Open.
LABEL FOR PRESET
PRESET NUMBER ------
3. Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a
character, position the cursor beside BACKSPACE and then press Iris Open.
1234567890
OK
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ.,-/
CANCEL
SPACE
4. When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.
5. Enable the title text label by doing the following:
abcdefghij
klmnopqrst
uvwxyz*;:
BACKSPACE
a. Move the cursor beside ENABLE TITLE TEXT.
b. Press Iris Open. The cursor moves to the right.
c. Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.
(Continued on next page)
|